Dramatically Improves Safety Includes All Components At The Spindle Needed To Convert To Front Disc Brakes 11 Drilled, Sweep Slotted & Vented Rotors Ceramic Pads For Maximum Stopping Power Bolt-On To Original Spindles Kit Spaces Wheels Out Toward Fender 7/8 On Each Side Are you ready for a huge improvement over original, unpredictable four-wheel drum brakes? If you are, then our front disc kit at the spindle with drilled and sweep slotted rotors is for you. Just bolt-on with our easy-to-follow instructions, add your own lines and master cylinder system, add fluid and go. Our kit includes: Large 11 drilled, sweep slotted and vented rotors Calipers & caliper brackets Ceramic brake pads Rubber Brake hoses Wheel bearings, all hardware needed to install all components at the spindle NOTE: Owners of 1957's with original 14 steel wheels will need to use an aftermarket wheel or later 14 wheel in order to clear the disc brake calipers.
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.