During the manufacturing process for the bodies of many current classic General Motors products, a chemical bath would be used. Drains incorporated into the bodywork to assist in this production step would later be covered. This floor…
During a day out behind the wheel of your classic Chevy you may encounter a desperate need to clean your windshield. An easy task to complete with supply of windshield washer fluid, a cracked or broken jar will make the effort of cleaning…
Is your radio getting poor reception or no longer working for AM/FM stations due to a worn-out or broken power antenna in your vehicle? Replace it with this 31" (79cm) 5-section chrome power antenna so that you can enjoy clear radio…
The 1970-1981 Camaro / Firebird 2 Piece Door Lock Gasket Set is designed to provide a protective seal between the exterior door lock cylinders and the body of your Corvette. These gaskets help prevent water, dirt, and debris from…
Correct replacement embossed blue "GM Mark of Excellence" door plate for 1967–1974 GM cars and trucks. This stamped metal plate replicates the original factory identification plate, restoring authentic appearance to door jambs and…
Ensure a secure and precise fit for your vehicle’s moldings with this 10-piece screw-in stud set. Designed for various classic car applications, these factory-style studs provide a strong and stable attachment for exterior trim and…
Replace your worn or missing windshield washer jar cap with this durable, high-quality cap designed to fit securely and keep your washer fluid contained. Ensure your windshield stays clear with this essential replacement…
Restoration Correct Outside Door Mirror Chrome With Embossed Bow Tie Emblem Fits Left (Driver) Or Right (Passenger) Side Includes Mirror Mounting Hardware Imported USA Made Mirror Available as Part # MR-2 Originally, the Bow Tie door…
This kit attaches to the core support and barely touches the bottom of your Camaro hood to keep it in place. As your Camaro rolls down the road, the hood is constanly moving side to side and front to back on the hood hinges. When topped…
Headlight Retaining Rings are a necessary safety item for correct installation of the headlights and proper night visibility. Driving with poorly installed or non-functioning headlights could prove catastrophic for you and other motorists…
Restoring or maintaining a classic Chevrolet Camaro, the most concerning owners will want to have any small detail in working order. Illuminating the rear license plate on several popular 1960s Chevrolets this reproduction license lamp…
Ensure a secure and factory-correct installation of your standard outside door mirror with this high-quality mounting kit, designed for 1963-1972 GM cars. This kit includes the correct hardware needed to properly mount the mirror to the…
Elevate your vehicle's visibility and style with our 7 Inch Round LED lights featuring Halo Daytime Running Lamps and Turn Signals. Experience enhanced safety on the road with powerful illumination and dynamic signaling. Crafted for…
This United Pacific LED Flasher is for use with all vehicles LED taillights and front turn signals. Your taillights and front turn signals are crucial to the safety of your vehicle and help prevent damage to you and your vehicle as a…
Trying to keep a car cover on the car in windy conditions can be difficult. Doing so just gotten easier with this new wind gust guard kit.
For use with passenger car and light truck car covers
Each kit…
0.30mm clear PVC top cover.
0.45mm basemat is mildew, abrasion and flame resistant.
Heavy Duty Basemat Impervious to oil, gas, and antifreeze.
Rust free;100% Nylon “self-healing” coil zippers.
No metal parts inside! No metal…
A factory original touch for a variety of General Motors passenger vehicles, this license plate rubber bumper provides protection to the license plate as well as the bodywork.
Compatible for use with a wide range of General…
Headlight bezels on your classic take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your…
Passenger-side rocker panel repair kit for 1973–1991 Chevy and GMC trucks. This direct-replacement patch restores structural integrity, replaces rusted or damaged rocker sections, and provides a true-to-original contour for proper door…
Secure your license plate with these durable screws, featuring a thread size of 1/4" (#14) x 3/4". Designed to fit a variety of vehicles, these screws ensure a stable attachment while maintaining a clean, polished appearance…
The inner door lock rod and bellcrank is essential for your car. In conjunction with that, the door lock rod bellcrank retainer is crucial as well. This is the correct plastic sleeve that holds the door pull lock rod to the inside door…
Secure your hood insulation with this high-quality hood insulation clip, designed for a range of vehicles. This clip ensures a tight fit, helping to reduce engine noise and enhance thermal insulation.
Universal fit for various…
Direct-fit windshield washer jar engineered for 1962–1972 GM cars and light trucks. This reservoir stores washer fluid, supports the washer pump and grommet, and provides a leak-resistant mount in the original OE location. Constructed…
Qualilty Reproduction Chrome With Embossed Bow Tie Emblem Fits LH or RH Includes Mirror Mounting Kit Imported Originally, the Bow Tie door mirror was available as a dealer installed option only. Now, you can add this Bow Tie mirror to your…
Optimize your GM car or truck’s hood alignment and reduce vibrations with our Outer Rear Hood Bumper Stopper, Rubber. Made from high-quality rubber, this essential component ensures a secure and cushioned closure for your hood…
Ensure a secure and precise fit for your vehicle’s moldings with this 30-piece screw-in stud set. Designed for various classic car applications, these factory-style studs provide a strong and stable attachment for exterior trim and…
This 1/4" inside diameter windshield washer hose, sold by the foot, is flexible vinyl tubing engineered to deliver washer fluid reliably from reservoir and pump to nozzles. Universal 1/4" ID sizing fits most factory and aftermarket…
Ensure reliable tail light performance with this 3-wire tail lamp socket with pigtail, designed for GM cars and trucks. This high-quality socket provides a secure connection for tail lamps, maintaining proper functionality and…
It is a magical time of the year when it is time to take the cover off your prized vehicles and go for a drive. This car cover bag provides a dry, sizable storage solution for when your automobile’s protective cover for when it’s…
Restore the smooth operation of your classic car’s doors with this premium 14-piece door hinge pin and bushing repair kit, designed for 1967-1979 Chevrolet Camaro, Pontiac Firebird, and Chevrolet Nova models. This kit includes…
Ensure secure attachment of your door lock pawls with this 2-piece retainer clip set, designed specifically for 1964-1988 models. These factory-correct retainer clips keep the door lock pawls firmly in place, maintaining proper door lock…