OVERSIZE 2Reproduction Of The Original Cardboard Pad Includes Insulation & Lower Rubber Edge Seal All Holes/Cutouts Pre-Punched For Easy Installation Requires Fasteners P/N 34-39 This Chevy firewall insulation pad is a reproduction of the original firewall and dash pad that covers the entire inner firewall. Original pads often harden, crack and fall apart; significantly reducing their heat and sound insulation capabilities. The original Chevy pads can even become a fire hazard; so be sure to inspect yours and replace if necessary. Be sure to make this decision early in the restoration process, as this pad is the first item to install under your dash before wiring, gauges, heater, etc? Unlike the reproduction flat pads, this one is just like original, so no shaping is required to fit the firewall The 1957 firewall pads are 2-piece, split at the steering column as original which makes installation a snap. All of the heater, wiring, hood hinge, steering column and fastener holes are pre-punched for easy installation. These punch-outs may be left intact if you car is not equipped with a heater or for custom installations. The firewall insulation pad uses one set of 15 pad fasteners P/N 34-39; the same as the original Chevy pad in your classic. The lower rubber seal that overlaps the forward carpet is double sewn just like original. For a proper, complete restoration install one of our new Chevy firewall insulation pads!
| Make | Model | Years |
| Chevrolet | Bel Air | 1957 |
| Chevrolet | Nomad | 1957 |
| Chevrolet | One-Fifty Series | 1957 |
| Chevrolet | Two-Ten Series | 1957 |
