Estimated arrival: 07/21/2022 (If Ordered Today)
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
|Shipping Note:||Oversize 1|
We'll find it for you. Give us a call at 855.444.6872 and we'll source that discontinued or hard to find part.
No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.
Muscle Cars & Classics always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.
Each column comes complete with a stainless steel dress up kit (Tilt/turn signal levers and hazard knob), GM wiring (4-1/4in. connector) and an all new canceling cam. These columns can connect to a factory linkage using a universal joint or a rag joint. All Flaming River Tri-Five columns come standard with a one-inch DD output shaft, so keep that in mind when designing steering linkage and selecting the appropriate couplers. This allows you to use any original GM steering wheel from 1968 and later. The majority of aftermarket steering wheels will fit onto these steering columns with the use of a steering wheel adapter.
Flaming River Paintable Finish columns are made from 304 grade stainless steel in paintable mill finish. It will never rust, is chemically clean and can be painted to match or highlight your Classic Chevy's interior. You've opted for an unpainted, mill finish column. If you're planning to apply a hue to it yourself, pre-treat with an abrasive pad to even out the finish and prepare it for paint. The column shroud and tube should then be primered prior to laying down the paintwork. Don't risk the column's integrity by taking it apart to paint. Make sure you put the column through all of the tilt positions to ensure you have full coverage and haven't missed any spots. Avoid using clear coat finishes as well.
Note: HTML is not translated!
Rating: Bad Good