OER 1947-55 Chevrolet, GMC Pickup Truck, Complete Cab Floor Pan Set, EDP Coated 14101A

Reproduction complete inner cab floor pan set for 1947-55 Chevrolet and GMC pickup truck models. Each floor pan is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit. Features all the correct factory holes and ribs just like original as well as the seat riser and fuel tank hardware. Comes finished in black EDP coating for rust and corrosion prevention. NOTE: For use with 1955 1st Series (earlier production) models.

• 1 - Complete floor pan
• 1 - Seat riser
• 1 - Rear seat riser
• 2 - Cab to running board seals
• 2 - Cab to running board seal retainers with screws
• 2 - Fuel tank straps
• 1 - Parking brake boot retainer plate

• Stamped steel construction replicates factory original design
• Includes seat risers, seals, retainers, and fuel tank hardware
• Factory-style ribs and holes for authentic appearance
• Black EDP coated for rust and corrosion protection

• Designed for 1947-55 Chevrolet and GMC pickup models
• For use with 1st Series (early production) models
• All braces must be welded to the floor pan
• Sold as a complete inner cab floor pan set
• Manufactured to OE specifications for accurate fit

Important: All braces will have to be welded to the floor pan.

• 1954 - 1954 Chevrolet 1500 Base
• 1947 - 1955 Chevrolet Truck Base
• 1947 - 1955 Chevrolet Truck 3800
• 1948 - 1955 Chevrolet Truck 3700
• 1947 - 1955 Chevrolet Truck 3600
• 1955 - 1955 Chevrolet Truck 3400
• 1955 - 1955 Chevrolet Truck 3200
• 1947 - 1955 Chevrolet Truck 3100
• 1955 - 1955 Chevrolet Truck 3500
• 1948 - 1954 Chevrolet Truck 3900

• 1951 - 1955 GMC 100
• 1947 - 1955 GMC 100-22
• 1953 - 1954 GMC 100-24
• 1952 - 1953 GMC 102-22
• 1951 - 1955 GMC 150
• 1947 - 1955 GMC 150-22
• 1953 - 1954 GMC 150-24
• 1951 - 1955 GMC 250
• 1951 - 1955 GMC 250-22
• 1951 - 1951 GMC 280-22
• 1951 - 1951 GMC 300
• 1950 - 1950 GMC FC100
• 1950 - 1950 GMC FC101
• 1950 - 1950 GMC FC102
• 1950 - 1950 GMC FC150
• 1950 - 1950 GMC FC152
• 1950 - 1950 GMC FC250
• 1950 - 1950 GMC FC251
• 1947 - 1955 GMC Truck

Note: Shipped truck freight.

Chevy built two very different trucks in the 1955 model year. The early 1955 run, called 1955 1st series, was the last of the Advance-Design trucks. Midyear, Chevrolet launched an all-new truck line called Task Force, known as the 1955 2nd series. The change brought new styling and key mechanical upgrades.

• Carryover Advance-Design body from 1947-1954 with rounded cab and separate fenders
• One-piece curved windshield and revised 1954-style grille carried into early 1955
• Inline six power and 6-volt electrics typical of the AD era
• Built only for a short early-1955 window before the redesign arrived

These traits reflect the 1954 updates that continued briefly into 1955 1st series production.

• All-new Task Force styling with flatter hood, integrated fenders, and wraparound windshield
• 12-volt electrical system became standard
• First-time optional small-block V8 (265) alongside the inline sixes
• New trim and bed options, including the modernized look that set the tone for 1956-1959

These updates debuted midyear 1955 and marked Chevy's first major truck redesign since 1947.

• 1st series = last Advance-Design carryover
• 2nd series = new Task Force design with wraparound glass, 12-volt system, and available V8

This midyear split is why you'll see two very different 1955 Chevrolets wearing the same model year.

OER® was established in the early 1980's to manufacture original equipment reproductions where every part is meticulously reproduced to exact factory specifications. All OER® parts are reverse engineered or manufactured using original blueprints when available to ensure the closest possible reproduction available on the market. When available, original factory tooling is utilized to insure complete originality. Our mission is to supply the highest quality parts available for the enthusiast and serious restorer. Whether you're a serious restorer, or just someone who wants a replacement part for your classic vehicle, OER® is the source for the finest quality parts on the market. Today, OER® is the most recognized brand in automotive restoration parts. Choose OER® for all your restoration needs.

Many OER® products are officially licensed by General Motors and the Chrysler Group ensuring the quality and authenticity of these products. The GM Restoration Parts logo and the MOPAR Authentic Restoration Product logo are the true signs of quality. OER® is licensed by GM and the Chrysler Group as an official restoration parts manufacturer.

Vehicle Fitment:

Specifications:

Reviews:

Related Products

Key Parts '73-'87 Foot Well, Driver's Side 0850-225 L

Model: 4021282

Condition: NEW

$52.99 ea

Redline Restomotive® 1982-1994 S-10 / Blazer / Jimmy Front Left Cab Floor Pan Section

Model: 5006656

Condition: NEW

$88.99 ea

Chevy Floor & Trunk Pan, With Braces, Full, 2 & 4-Door Sedan, 1955-1957

Model: 3003213

Condition: NEW

$7,225.99 ea

Key Parts '67-'72 Full Cab Floor Assembly for 4wd, or "High Hump", Floor 0849-243

Model: 4021004

Condition: NEW

$1,300.99 ea

Key Parts '73-'87 Foot Well, Passenger's Side 0850-226 R

Model: 4021283

Condition: NEW

$52.99 ea

Frequently bought together

Key Parts '47-'55 Inner Lower Rear Fender Section, Passenger's Side 0846-228 R

Model: 3033513

Condition: NEW

$65.99 ea

Key Parts '47-'55 Inner Lower Rear Fender Section, Driver's Side 0846-227 L

Model: 3033511

Condition: NEW

$65.99 ea