Reproduction of the original angle strips that attach the side boards on 1967-72 Chevrolet and GMC Pickup Stepside short bed models. These angle moldings are bolted to the wood and spot welded to the bed side. Features pre-punched square holes in the original bolt pattern. Strips are 1-1/2" wide x 1" tall and are roll formed from 18 gauge 430 stainless steel. Sold in pairs.
Chevrolet Truck ApplicationsConfused about wood bed parts terminology and what parts you might need to add or replace a wood bed? Click the link below to find the answers:
| Make | Model | Years |
| Chevrolet | C10 Pickup | 1973 - 1974 |
| Chevrolet | C10 | 1975 - 1986 |
| Chevrolet | C15 | 1982 - 1986 |
| Chevrolet | C20 Pickup | 1973 - 1974 |
| Chevrolet | C20 | 1975 - 1986 |
| Chevrolet | C30 Pickup | 1973 - 1974 |
| Chevrolet | C30 | 1976 - 1986 |
| Chevrolet | C35 | 1983 - 1985 |
| Chevrolet | K10 Pickup | 1973 - 1974 |
| Chevrolet | K10 | 1975 - 1986 |
| Chevrolet | K20 Pickup | 1973 - 1974 |
| Chevrolet | K20 | 1975 - 1986 |
| Chevrolet | K30 Pickup | 1973 - 1974 |
| Chevrolet | K30 | 1977 - 1986 |
| Chevrolet | R10 | 1987 |
| Chevrolet | R20 | 1987 |
| Chevrolet | R30 | 1987 |
| Chevrolet | V10 | 1987 |
| Chevrolet | V30 | 1987 |
| GMC | C15/C1500 Pickup | 1973 - 1974 |
| GMC | C1500 | 1980 - 1986 |
| GMC | C15 | 1975 - 1978 |
| GMC | C25/C2500 Pickup | 1973 - 1974 |
| GMC | C2500 | 1980 - 1986 |
| GMC | C25 | 1975 - 1978 |
| GMC | C35/C3500 Pickup | 1973 - 1974 |
| GMC | C3500 | 1980 - 1986 |
| GMC | C35 | 1975 - 1978 |
| GMC | K15/K1500 Pickup | 1973 - 1974 |
| GMC | K1500 | 1980 - 1986 |
| GMC | K15 | 1975 - 1978 |
| GMC | K25/K2500 Pickup | 1973 - 1974 |
| GMC | K2500 | 1980 - 1986 |
| GMC | K25 | 1975 - 1978 |
| GMC | K35/K3500 Pickup | 1973 - 1974 |
| GMC | K3500 | 1980 - 1986 |
| GMC | K35 | 1978 |
| GMC | R1500 | 1987 |
| GMC | R2500 | 1987 |
| GMC | R3500 | 1987 |
| GMC | V1500 | 1987 |
| GMC | V2500 | 1987 |
| GMC | V3500 | 1987 |
| Height | 81 in |
| Length | 6 in |
| Weight | 12 lbs |
| Width | 6 in |
