The Precision Hood To Cowl Seal CS 1110 60 is a replacement hood-to-cowl weatherseal designed to keep water, dirt, and road noise out of the cowl area and engine bay. It restores the factory sealing function between the hood and cowl, helping prevent corrosion, water intrusion to the firewall and HVAC intake, and reducing wind noise and vibration. Made from durable EPDM-style synthetic rubber for long-lasting compression set resistance and weatherability. Verify fitment by part number CS 1110 60 for your vehicle application before ordering.
Features:
- Designed to restore the hood-to-cowl seal; verify compatibility by part number CS 1110 60.
- Made from durable EPDM-style synthetic rubber for ozone, UV and temperature resistance.
- Seals against water, dust and road debris to protect the cowl, firewall and HVAC intake.
- Reduces wind noise and vibration for a quieter cabin.
- OEM-style profile for a precise fit and proper hood alignment.
- Easy to install—suitable for restorations and routine maintenance or replacement.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 30-60 minutes
Instructions:
- Open the hood and support it securely.
- Carefully remove the old seal by prying it out of the channel with a trim tool or flathead screwdriver; retain any clips if reusable.
- Clean the mounting area thoroughly with rubbing alcohol or degreaser to remove old adhesive, dirt and oils; allow to dry.
- Test-fit the new seal along the cowl edge to confirm orientation and fit. Trim excess if necessary, cutting a little at a time.
- If adhesive is recommended, apply a thin bead of weatherstrip adhesive to the mounting channel or to the seal per adhesive instructions.
- Press the seal firmly into place along the channel, starting at one end and working to the other. Use masking tape to hold in place temporarily if needed.
- Close the hood gently to verify clearance and alignment; adjust seal position if necessary before the adhesive cures.
- Allow adhesive to cure per manufacturer instructions (typically 1–24 hours) before driving.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
C10 Panel |
1960 - 1966 |
| Chevrolet |
C10 Pickup |
1960 - 1966 |
| Chevrolet |
C20 Pickup |
1960 - 1966 |
| Chevrolet |
C30 Pickup |
1960 - 1966 |
| Chevrolet |
C40 |
1960 - 1962 |
| Chevrolet |
C50 |
1960 - 1966 |
| Chevrolet |
K10 Pickup |
1960 - 1966 |
| Chevrolet |
K20 Pickup |
1960 - 1966 |
| Chevrolet |
Suburban |
1960 - 1966 |
| GMC |
1000 Series |
1960 - 1965 |
| GMC |
1000 |
1966 |
| GMC |
1500 Series |
1960 - 1965 |
| GMC |
1500 |
1966 |
| GMC |
2500 Series |
1960 - 1965 |
| GMC |
2500 |
1966 |
| GMC |
3000 |
1960 - 1966 |
| GMC |
3500 |
1960 - 1966 |
| GMC |
K1000 Pickup |
1966 |
| GMC |
K1000 |
1966 |
| GMC |
K15/K1500 Pickup |
1966 |
| GMC |
Suburban |
1960 - 1966 |
